NP-125S/150S Slant Edge Cutting Pliers ：：：Tsunoda Co., Ltd.：：：

|

日本語

Home

Products

About Us

Contact

Slant Edge Cutting Pliers

125mm NP-125S / 150mm NP-150S JISSpring

Click pictures to enlarge

Suitable for cutting targets at the closest point from walls.
Clean cut surface.
Coil spring helps continuous cutting works.
Stripping hole loaded on the edge.
Removing staples using the tip of edge.

Specifications

Material | Carbon steel for machinery（S58C）
Heat Treatment | Oxide-free heat treatment, Induction hardening on edge
Body hardness [HRC] | 42～50
Edge hardness [HRC] | 54～62
Handle cover | PVC dipping
Surface treatment | Anti-rust oils

	Size[mm]								Weight [g]	EAN-code (4952269)
	Overall length	Head width	Head thickness	Handle width	Nose length	Edge length	Hole diameter	Head angle	Weight [g]	EAN-code (4952269)
NP-125S	132	14	16	50	21	24	1.8	40°	95	104035
NP-150S	157	15	17	50	23	25	1.8	40°	135	104042

Cutting capacity (φmm)	Stainless	Soft iron	Copper	Stranded copper wire [mm²]	Brass	Plastic
NP-125S	0.9	1.2	2.0	2.0	1.6	3.0
NP-150S	1.2	1.6	2.6	5.5	2.0	4.0

Note: Do not use to cut harder wire or anything above it rated the capacity.